AGMA VMC-116
High-Rigidity Structure
All three axes have a hardened box-way design. In addition, the spindle headstock, column, saddle, base, and table are all made of high-quality Meehanite cast iron.
All slide-ways are heat-treated and precision ground to maintain high precision.
Double guide-ways and a counter-balanced design prevent unexpected vibration from the Z-axis drive, which helps achieve a quality surface finish.
Strategically placed ribs help enhance the spindle headstock structure. The spindle headstock also has the proper proportion of contact with the column, which creates strong spindle support.
 |
 Hinged-Belt Chip Conveyor(Option)
This allows for rapid and efficient chip removal during machining in order to maintain a clean machine. |
 |
Oil Circulating Cooling System for Spindle
A high efficiency spindle cooling system dissipates running induced heat generation in order to maintain spindle accuracy and prolong spindle life. |
 |
Coolant Thru Spindle (C.T.S.)(Option)
THE C.T.S. (COOLANT THROUGH SPINDLE) (A TYPE) system provides 20 bar (280 PSI) of hi-pressure coolant delivery that effectively reduces tool wear because of heat and the slow evacuation of metal chips. |
 |
Calibration with laser interferometer is Performed and Certified by PMC
All of our machines are calibrated according to the VDI 3441 3? standard. Calibration is performed for the full travel length of each axis. Each measurement is taken six times to ensure the most consistent and accurate readings. |
 |
Enhanced Base Design
The base of the VMC-95/116 has 4-hardened ways that allow for greater stability and accuracy even with heavy loading. In essence, the design fully supports the saddle and table along the entire travel lengths of the X and Y-axes. |
 |
24 Tools Magazine
A rapid arm-type tool changer is driven with a precision cam, maintaining toolchanging accuracy of 0.01mm, which in turn will help maintain long-term spindle-clamping accuracy. |
 |
Automatic Lubrication System
All AGMA machines use a pressurized central lubricating system. The PLC controlled system allows all three axes to be lubricated evenly to maintain accuracy and prolong machine life. |
 |
Double Stoppers Design
To prevent any deviation between the servomotor housing and ball screw bearing housing, each axis is equipped with two stoppers to guarantee absolute axial alignment. |
 |
Volumetric Oil Distributor
Lubricating oil is evenly distributed to all the sliding surfaces of the machine via volumetric oil distributors. All stationary lines are made of rigid alloy pipe and hard-plumbed for low maintenance operation over the life of the machine. |
 |
Forceful Cleaning Spray-Gun
Equipped on the right front side of base this unit along with the assistance of a high-pressure coolant and air mixture helps increase table cleaning speed. |
| Model | VMC-95 | VMC-115 | VMC-116 | |
|---|---|---|---|---|
| Spindle | Spindle Taper | No. 40 | No. 40 / No. 50 | |
| Transmission | Belt Driven | Belt Driven (BT-40) | ||
| Spindle Speed | 8,000 r.p.m. | P8,000 (BT-40) | ||
| Table | Table Size | 1,050 x 580 mm (41.34″ x 22.83″) |
1,200 x 580 mm (47.24″ x 22.83″) |
|
| T-Slot Size | 18 x 5 x 120 mm (0.71″ x 5 x 4.72″) |
|||
| Work Area | 900 x 550 mm (35.43″ x 21.65″) |
1,100 x 550 mm (43.31″ x 21.65″) |
||
| Max. Table Load | 800 kgs (1,760 lbs) | |||
| Travel & Feedrate | X Axis | 900 mm (35.43″) | 1,100 mm (43.31″) | |
| Y Axis | 550 mm (21.65″) | 600 mm (23.62″) | ||
| Z Axis | 580 mm (22.83″) | 600 mm (23.62″) | ||
| Distance from Spindle Nose to Table | 170~750 mm (6.69″~29.53″) |
170~770 mm (6.69″~30.31″) |
||
| Distance from Spindle Center to Column Ways | 610 mm (24.02″) | 645 mm (25.39″) | ||
| Rapid Traverse | X, Y : 20 m/min (787 IPM) Z : 15 m/min (590 IPM) | |||
| Cutting Feedrate | X, Y, Z : 1~10,000 mm/min (393 IPM) | |||
| ATC | Tool Shank | BT/CAT 40 | BT-40 / BT-50 | |
| Pull Stud | MAS P40T-1 (45º) | |||
| Magazine Capacity | 16 tool (option) / 24 Tool (standard) | |||
| Max. Tool Diameter (with adjacent pocket empty) |
Ø125 mm (4.93″) | Ø130 mm (5.12″) | Ø125 mm (4.93″) | |
| Max. Tool Diameter (full storage) |
Armless=Ø100 mm (3.94″) Arm=Ø80 mm(3.15″) (option) |
|||
| Max. Tool Length | 300 mm (11.81″) | |||
| Max. Tool Weight | 7 kgs (15.4 lbs) | |||
| ATC Type | Arm Type (std.) /Armless Type (opt.) | |||
| Motor | Spindle(Cont./30min.) | 7.5/11 kw(10/15 HP) | ||
| X/Y/Z Axes(Fanuc) | 3 kw (4.02 HP) | |||
| Lubrication Pump | 0.025 kw (0.033 HP) | |||
| Coolant Pump | 0.49 kw (0.66 HP) | |||
| Misc. | Machine Height | 2,767 mm (108.94″) | 2,640 mm (103.94″) | 2,767 mm (108.94″) |
| Floor Space | 3,000 x 2,432 mm (118.11″ x 95.75″) |
3,000 x 2,720 mm (118.11″ x 107.09″) |
3,000 x 2,432 mm (118.11″ x 95.75″) |
|
| Machine Weight | 6,700 kgs (14,740 lbs) | 7,000 kgs (15,400 lbs) | 8,000 kgs (15,400 lbs) | |
| Control | FANUC 0iMD | FANUC 0iMF | ||
| Positioning Accuracy (Full Travel) | ±0.005 mm (±0.0002″) | |||
| Repeatability | ±0.003 mm (±0.00012″) | |||