AGMA A-6

Ultra-High-Speed Vertical Machining Center

AGMA once again presents high speed A-series machining centers to a foresighted customer like you with industryleading scraping technology of hardened box way and the technological capacity of manufacturing process. This series of machines are based on high-rigidity Meehanite cast iron and adopt 8,000~10,000RPM belt driven spindle or 10,000 ~15,000RPM direct driven spindle. Three axes adopt high precision linear guideways and ball screws. Also other optional accessories which fully comply with a variety of cutting demand now and in the future are available.

Synchronously adopt the European & Japanese design

Wide-span rigid column
Japan-made NSK extra-large 35mm precise roller- rail linear guide way (option)
Adopt high-end direct motors and high rigidity couplings in three axes
High quality full-length enclosed splash guard, elegant appearance, wellexecuted, and in good taste

Extra-large Z-axis motor
4.0KW (no counter balance design)

High reliable and high accuracy ballscrew design
Ø40mm high class double nut provides strong rigidity, high torque, better accuracy, long-life, and effectively heat
extension control.

Extra wide door design
The width of door reaches 850mm for conveniently loading and unloading the fixture and workpiece.

Stable air supply equipment
The gas storage barrel assists to acquire steady air source to increase equipment utility rate.

Unique Column Design

Wide-span rigid column
X-shaped cross rib package column structure

Integrated ATC support interface Block

Renishaw Ballbar System
Carry out a three dimension circular test and optimal adjustment.

Ballbar Test Figure
Each machine goes through telescoping ball-bar tests to check contouring accuracy and uncover any　geometric errors. This testing ensures the machine structure is both square and parallel.

Calibration with Laser Interferometer was Performed and Certified by PMC
Agma authorizes PMC to conduct 100% inspection to full travel length of three axes. Standard VDI 3441 3δis employed to ensure the machine accuracy and righteous of the inspection. For each axis,inspection along full axial travel length backwards and forwards for 6 times is conducted.

Dynamic characteristics of the high-speed spindle verify Figure

Cutting Capability

Workpiece Material：A6061 T6
Spindle Speed：12,000rpm
Cutting Feedrate：10,000mm/min.
Cutter：ø12 × 3Flutes End Mill for Aluminum
Depth of cut：12 mm
Width of cut：1.8 mm

Cutting Capability

Workpiece Material：P20
Spindle Speed：7,000rpm
Cutting Feedrate：6,500mm/min.
Cutter：ø12 × 4Flutes End mill
Depth of cut：18 mm
Width of cut：0.8 mm

	Model	Unit	EA-600
SPINDLE	SPINDLE TAPER		NO.40
	TRANSMISSION		DIRECT DRIVE
	SPINDLE SPEED	r.p.m.	10000
	SPINDLE DIAMETER	mm	70
TABLE	TABLE SIZE	mm	730 x 430
	T-SLOT	mm	18 x 3 x 100
	MAX. TALBE LOAD	kgs	300
TRAVEL & FEEDRATE	X AXIS	mm	600
	Y AXIS	mm	410
	Z AXIS	mm	460
	DISTANCE FROM SPINDLE NOSE TO TABLE	mm	150 ~ 610
	DISTANCE FROM SPINDLE CENTER TO SURFACE OF COLUMN WAY	mm	494
	RAPID TRAVERSE (X/Y/Z)	mm/min	X,Y,Z:48,000
	CUTTING FEEDRATE	mm/min	X,Y,Z: 1 ~ 10,000
ATC	TOOL SHANK		BT-40
	PULL STUD		MAS P40T-1(45º)
	MAGAZINE CAPACITY	pcs	24
	MAX. TOOL DIAMETER (FULL STORAGE)	mm	Ø60
	MAX. TOOL LENGTH	mm	250
	MAX. TOOL WEIGHT	kgs	7
	ATC TYPE		ARM TYPE
	SELECT CUTTING SPEED (T-T/C-C)	Sec	1.4 / 2.5
MOTOR	FOR SPINDLE (CONT./30 min.)	Kw	5.5/7.5
	X/Y/Z Axis	Kw	3/3/3
	FOR CTTING	HP	1
MISC.	MACHINE HEIGHT	mm	2560
	MACHINE SPACE	mm	1900 x 2560
	MACHINE WEIGHT	kgs	3000 ~ 3300
	CONTROLLER		0iMD 8.4″

AGMA A-6

Menu

Categories

Contact us