AGMA A-10

High-Rigidity Structure Design

Adopt Meehanite cast iron (General Industrial Standard:FC20~25) and heat balance design.Since Meehanite cast iron provides larger damping and smaller deformation,our machines are more durable and with extraordinary performance to cope with long term manufacturing.

Synchronously adopt the European & Japanese design

Wide-span rigid column
Japan-made NSK extra-large 35mm precise roller- rail linear guide way (option)
Adopt high-end direct motors and high rigidity couplings in three axes
High quality full-length enclosed splash guard, elegant appearance, wellexecuted, and in good taste

Extra-large Z-axis motor
7.0KW (no counter balance design)

High reliable and high accuracy ballscrew design
ø40mm high class double nut provides strong rigidity, high torque, better accuracy, long-life,and effectively heat extension control.

Extra wide door design
The width of door reaches 1160mm for conveniently loading and unloading the fixture and workpiece.

Stable air supply equipment
The gas storage barrel assists to acquire steady air source to increase equipment utility rate.

Renishaw Ballbar System
Carry out a three dimension circular test and optimal adjustment.

Ballbar Test Figure
Each machine goes through telescoping ball-bar tests to check　contouring accuracy and uncover any　geometric　errors. This testing ensures　the machine structure is both square and parallel.

Calibration with Laser Interferometer was Performed and Certified by PMC
Agma authorizes PMC to conduct 100% inspection to full travel length of three axes. Standard VDI 3441 3δis employed to ensure the machine accuracy and　righteous of the inspection. For each axis, inspection along full　axial travel　length backwards and forwards for 6 times is conducted.

Dynamic characteristics of the high-speed spindle verify Figure

Cutting Capability

Workpiece Material：A6061 T6
Spindle Speed：12,000rpm
Cutting Feedrate：10,000mm/min.
Cutter：ø12 × 3Flutes End Mill for Aluminum
Depth of cut：12 mm
Width of cut：1.8 mm

Cutting Capability

Workpiece Material：P20
Spindle Speed：7,000rpm
Cutting Feedrate：6,500mm/min.
Cutter：ø12 × 4Flutes End mill
Depth of cut：18 mm
Width of cut：0.8 mm

	Model	Unit	A-10
Spindle	Spindle Taper		No. 40
	Transmission		Belt Driven
	Spindle Speed	r.p.m.	8,000 r.p.m.
Table	Table Size	mm	1,100 x 560
	T-Slot	mm	18 x 5 x 100
	Working Area	mm	1,020 x 560
	Max. Table Load	kgs(lbs)	700
Travel & Feedrate	X Axis	mm	1,020
	Y Axis	mm	560
	Z Axis	mm	510
	Distance from Spindle Nose to Table	mm	150~660
	Distance from Spindle Center to Column Ways	mm	624
	Rapid Traverse (X/Y/Z)	m/min(IPM)	X,Y,Z:32/32/28
	Cutting Feedrate	mm/min(IPM)	X,Y,Z:1~12,000
ATC	Tool Shank		BT-40
	Pull Stud		MAS P40T-1(45º)
	Magazine Capacity		24
	Max. Tool Diameter (Full Storage)	mm	Ø80
	Max. Tool Diameter (With Adjacent Pocket Empty)	mm	Ø130
	Max. Tool Length	mm	300
	Max. Tool Weight	kgs(lbs)	7
	ATC Type		Arm Type
	Tool Choose Method		Short Cut for Tool Choose
Motor	Spindle(Cont./30min./10min.)	kw(HP)	7.5/11 kw(10/15 )
	X/Y/Z Axes(Fanuc)	kw(HP)	3/3/7 (4/4/10 )
	Lubrication Pump	kw(HP)	0.025
	Coolant Pump	kw(HP)	0.86
Misc.	Machine Height	mm	2,650
	Machine Space	mm	2,250 x 2,610
	Machine Weight	kgs(lbs)	6,800
	Controller		FANUC 0iMD 8.4”

AGMA A-10

Menu

Categories

Contact us